🎉 UniFab 3030 | UI Upgrade & Nvidia 50 Series GPU Utilization Enhancement

Ctrl+Y · 2025-10-17T10:09:40+00:00

Dear UniFab users 🎉, Thank you for your continued support and trust in UniFab AI! 🎉We are excited to announce that the brand-new UniFab 3030 will be offici...

Alex_Videoman

sismotik21 this reenforces my complain, one can not optmize for specific apps and models without optimizing for the others, it is time to optimize across the board and achieve decent performances (same as a movie frame rate at the least)

Alex_Videoman

sismotik21 btw you say 40% improvement, but can you share the fps you get for each model as I did so that we can really see the discrepancies here….

sismotik21

Alex_Videoman Compartí arriba, las únicas que mejoraron son la 5090, 5080 pero la tarjeta 5060 en vez de mejorar bajo a - 2% esta pésimo la 5060 ti mas fallas y problemas tengo con la actualización 3030, por el momento las únicas maquinas que están en trabajo y producción son las 5090 y 5080 que con esa mejora compensa el tiempo y estamos a full producción aprovechando los días y horas de ahorro en tiempo. Probé con una tarjeta AMD RX 7900 XTX y de verdad pésimo corre a 1.5 fps me da sueño tener esa tarjeta feliz mente solo fue prestado y se lo devolví a un amigo, también probé la rtx 4060ti igual esta super lenta no pasa nada esta igual que una 5060 ti volvemos al pasado super lenta las unicas que ven la mejora son la 5090 y 5080.

Alex_Videoman

sismotik21 I understand, but what do you get in term of fps for each for the 5090 and 5080 with AI upscaler and HDR upscaler and the different models so that we can have a basis of comparison between these two and the 4070Ti?

sismotik21

Alex_Videoman En UPSCALER ya publique están de 48 fps a 52 fps una mejora de casi 40% a lo que se tenia anterior en HDR igual hay una leve mejora de 40 fps a 50 fps, pero como ya mencione solo estos 2 modelos trabajan y mis otras tarjetas series 50 de mas bajo como la RTX 560TI no hay ninguna mejora mas bien a ralentizado su rendimiento antes 2 fps ahora 1fps que estará pasando con ese modelo, alguien que tenga otros modelos y nos compartan sus mejoras o su tristeza en lentitud.

Alex_Videoman

sismotik21 are these for all upscaler models (speed, quality, texture and anime) and HDR models (Fast, FHD, QHD, UHD) or do you see differences between these models in term of fps?
As you can see mine vary a lot between the AI models
Thank you

Alex_Videoman

It is interesting to notice that our friend Ctrl Y is very quiet now Could you let us know a plan to improve the 4000s performances with a decent target fps and fix the 5060 as well?

Ctrl+Y

Alex_Videoman Thank you for your feedback. I have recorded your request for future product optimization. I am very sorry for the bad experience you have had. Please be patient and we will optimize it in subsequent versions.

Alex_Videoman

Ctrl+Y btw I need to correct myself, with a real movie not benchmark test, FHD model rec 2020 HDR conversion runs at 4-5fps which is twice less than before, please it is now time to fix that

vivi

Alex_Videoman Is it slower than before?
We’ve reported this problem. We’ll check on our end.

Ctrl+Y

Alex_Videoman The above is based on my GPU: NVIDIA GeForce RTX 4070
Fast model rec 2020 = 47fps/s
QHD rec 2020 = 13fps/s

Alex_Videoman

Ctrl+Y You need to use real movies (90min+) not clips, happy to send you mine, you have my screenshot, so clearly this is not the performances of a RTX 4070 Ti which is faster than the 4070 in theory…

Alex_Videoman

OK you did not use 4k inputs, so in order to make sure I have a clean installation, I remove everything on my PC, then did a clean install of UniFab AI I have downloaded the latest models, etc..
Now let’s see the results with a dora the explorer TV show, I have a 1080p version and a 4K version.
These will be real case experience and benchmark.

Nowhere close to a decent performance here with 4k

Alex_Videoman

FHD getting worse except for 4K

Alex_Videoman

QHD model, even worse:

Alex_Videoman

And last one 4K UHD:

Alex_Videoman

So you have the real life performances here for a 1080p and 4K TV show episode. I will also upload them on the ftp server under my directory so that you have them on your side.
But as I was saying the performances on the 4070Ti are not acceptable at this point, they went down with the latest release which make it even worse even if they were bad from the beginning.
The target should be easy: for fast model, FHD and QHD, the min frame rate should be at least the same as the video frame rate (24-29fps)….

vivi

Alex_Videoman We have tested 3029 and 3030. The speed of 3030 has been improved. Please make a comparison with 3029 with the same source in fast or fhd mode.

sismotik21

Señores de UNIFAB si bien incremento la velocidad con las tarjetas 5090, lo que estado notando es que no hay una calidad en UPSCALER es como si solo copiara el video a 48 fps no hay mejora en calidad, que esta pasando reviso el trabajo de todo una semana de 7 días de trabajo y tengo lo mismo igual que el original no hay nada de mejora de calidad por favor pronunciarse que esta pasando no hay ninguna mejora en UPSCALER.

Ctrl+Y

sismotik21 Thank you for your feedback. Please provide a comparison screenshot or source file, and our testers will test it.

Alex_Videoman

vivi will do but even if it was the case, these performances are not acceptable really, as I mentioned, one would expect to run at least the speed of the video (24-29fps), not low teens

Alex_Videoman

vivi actually now it is even worse since Saturday the performances are not about 4-5fps for FHD in the latest release which makes it unusable at this point…..

What is the plan of the UniFab team???

« Previous Page Next Page »